Ball Valve
STS Integrated Press Ball Valve
STS Integrated Press Ball Valve
NAMING METHOD
L
H
15A
100
60
20A
113
63
25A
122
73
32A
163
80
40A
204
89
50A
216
96
Tupress / EQ Joint : Specification & Materials
Specification
Features
- Raw material : Stainless steel (STS 304)
- Test pressure Body pressure : 2.94 MPa / Leakage : 1.74 Mpa
- Usage pressure : 0.98 MPa 1OK
- Lifetime : same as STS pipe lifespan
- Constructability : press type (labor cost reduction)
- Certificate : Patent No. 10-1236872
- General-Type KC certified product
Specification
- It is economical, despite being a press type stainless steel.
- Leakage frequency is reduced since there are no screwed parts.
- There is no concern about corrosion, and The water quality is clean.
- FULL BORE can supply sufficient flow rate.
- It is easy to construct insulation by lengthening the neck (STEM).
-
Valves should be cut and replaced if they need to be repaired, but the possibility of malfunction is low.
※ Union type ball valve will likely be cut and replaced during repair.
Materials
No.
Parts
Materials
1
BODY
SSC13
2
BONNET
SSC13
3
BALL
STS304 or C3771
4
HUB
SSC13
5
STEM
STS304 or C3604